Taizhou city huangyan Longe mould Co.,Ltd

TEL: +86-576-84036895

FAX: +86-576-84112095

M.B: 008613957625477, 008613957629256

E-mail: sales@longemould.com


You are here: Home - Products

	Bottle blowing machine
		LG-6L LG-20L○Adopt the new type double bend arm and four pull rod-clamping structure(won the patent).cross direction;middle mould board is move parallel;the distance between two mold board is adjusted by the chain wheel,Thus,the clamping force is very strong. ○The machine frame is produced by the whole complete casting bottom,so that the machine are firm and running stable.○Adopt the straight slide way,reduce the friction and lengthen the life of the machine.○Double start working button,which is designed for avoiding the injury.○Power saving design that can increase your profits.○The single direction of pre-from placing and bottle picking,which increase the output.○Segregate type air controlling system,which is designed for avoiding waste pollution.○The stretching air cylinder is adjusted parallel from front to back,from left to right freely by regulator. Technical Specifications General Information LG3L LG3L-2C LG-6L LG20L LG1L-2C LG3LR-2C Heating capacity 1500 pcs/hr 2000pcs/hr 1000pcs/hr 450pcs/hr 1000pcs/hr 120pcs/hr 1500pcs/hr 1300pcs/hr Theoretial output 3.5kw 15kw 12kw 30kw 35kw 15kw Max bottle volume 2L(1出2） 2.0L(1出2） 4.0L（1出1） 8L(1出1）3L（1出2) 30L 1.5L(1出2） 1.5L(1出2） Blowing pressure ≤3.0Mpa ≤3.5Mpa ≤3.5Mpa ≤3.5Mpa ≤3.0Mpa ≤3.5Mpa Motion pressure ≤1.0Mpa ≤1.0Mpa ≤1.0Mpa ≤1.0Mpa ≤1.0Mpa ≤1.0Mpa Max diameter×height Φ140×H340mm Φ140×H340mm Φ180×H370mm Φ280×H450mm Φ90×H320mm Φ90×H320mm Mould thickness 120-220mm 120-220mm 160-260mm 300-400mm 120-220mm 120-220mm Weight 700kg 1500kg 1000kg 1500kg 1500kg 1500kg Main machine 1400×600×1600mm 1400×600×1600mm×2 1700×600×1700mm 2200×700×2250mm 1400×600×1700mm×2 1400×600×1700mm×2 Heater 880×520×900mm 2000×600×1450mm 2000×650×1450mm 2200×700×1700×mm 4500×600×1700mm 2000×680×1450mm

	Bottle blowing machine
		LG2C2L/F(2-Cavity)LG4C2L/F(4-Cavity)LG6C1L/F(6-Cavity)LG1C5L/F(1-Cavity)LG2C5L/F(2-Cavity)○Automatic preform input and ready bottle output system.○Machine adopt with the overall structure of super-standard anti-vibration design,high-speed operation state of the machine will shake down to a minimum,and ensure that the life of components using will not affected from mechanical vibrations.○Machine adopt modular assembly methods,greatly decrease the local amendments due to technological improvements when the machine is on processing.○In order to ensure the rate of fonished products,the oven which used in measuring the performance of the machine,sit in a very important position.The structure oven adopt the intemational most advanced energy-saving technology of infrared radiation heating,temperature control with automatic negative feedback,closed-loop regulation model. △Technical Specifications an end item General Information LG2C2L/F LG4C2L/F LG6C1L/F LG2C5L/F LG1C5L/F Container Theoretical outputMax container volumeMax neck diameterMax container diameterMax container heightNumber of cavity 2500 pcs/hr1.5L45mm100mm340mm2 Cavity 4000pcs/hr1.5L45mm100mm340mm4Cavity 6000pcs/hr0.6L45mm67mm270mm6Cavity 1200pcs/hr5L50mm175mm350mm2Cavity 750pcs/hr5L50mm175mm350mm1Cavity Electrical System Total powerUse power 25kw15kw 35kw21kw 45kw27kw 40kw25kw 25kw15kw Air System Working pressureLow pressure consumingBlowing pressureHigh pressure consuming 1.0 Map1400L/min≤3.5Mpa1200L/min 1.0 Map1600L/min≤3.5Mpa2400L/min 1.0 Map1600L/min≤3.5Mpa3600L/min 1.0 Map1600L/min≤3.5Mpa2400L/min 1.0 Map1400L/min≤3.5Mpa1200L/min Chiller Water Operating pressureTemperatureFlow rate 0.3-0.5Mpa10-12℃30L/min 0.3-0.5Mpa10-12℃45L/min 0.3-0.5Mpa10-12℃75L/min 0.3-0.5Mpa10-12℃45L/min 0.3-0.5Mpa10-12℃30L/min Machine Machine dimensionMachine weight Feeding Machine dimensionFeeding Machine weight 1.9×1.6×2.0m1300kg2.0×1.0×2.0m200kgs 2.5×2.0×2.0m2200kg2.0×1.0×2.0m220kgs 4.2×2.0×2.0m4200kg2.0×1.2×2.0m/2.1×0.9×2.0m200kgs 2.5×2.0×2.0m1900kg2.0×1.0×2.0m200kgs 2.0×1.4×2.0m1600kg2.0×1.0×2.0m200kgs ·Actual discharges depend on bottle shape and preform qualification.·The above technical parameters are subject to continual update,please rake the real product as the base.

	48 Cavity Preform Mould
		◎Preform injection mould from 1 cavity for wide mouth jar and gallon bottle preform up to 72 cavities narrow neck.◎Tube blank is designed with the help of computer,which surely contributes to the increasing of yield of bottle.◎Employes′intemationally advanced two-step dual taper locating technology,Each cavity self-locks independently to ensure low decent ration of product.◎Core and cavity are made of special mould steel after preheating treatment in the onginal factory in Sweden.individual temperature control of all cavities.◎Lip cavity is made of imported nitrated steel,which is of high hardness and long service life,in accordance with intemational Standard.◎The excellent hot runner design assures uniform heating and greatly improves the quality of plastic product.◎No cutting of gate is employed to reduce the labor intensity;Standard inter-changeable mould components.◎The life of mould is more than 2 million times.◎We are deeply recognizes that the only way for a company’s endeavors to perpetuate,depending on continuous improvement and innovation,reaching market requirements,and providing competitive products for our customers.Just like our principles reveal:"Customer Satisfaction,Colleague Delight,Endeavor Perpetuity〃.·Close tolerances·Long lifetime·Perfectly balanced hotrunner system·High productivity·Maximised cooling·Energy saving

	48 Cavity Preform Mould
		◎Preform injection mould from 1 cavity for wide mouth jar and gallon bottle preform up to 72 cavities narrow neck.◎Tube blank is designed with the help of computer,which surely contributes to the increasing of yield of bottle.◎Employes′intemationally advanced two-step dual taper locating technology,Each cavity self-locks independently to ensure low decent ration of product.◎Core and cavity are made of special mould steel after preheating treatment in the onginal factory in Sweden.individual temperature control of all cavities.◎Lip cavity is made of imported nitrated steel,which is of high hardness and long service life,in accordance with intemational Standard.◎The excellent hot runner design assures uniform heating and greatly improves the quality of plastic product.◎No cutting of gate is employed to reduce the labor intensity;Standard inter-changeable mould components.◎The life of mould is more than 2 million times.◎We are deeply recognizes that the only way for a company’s endeavors to perpetuate,depending on continuous improvement and innovation,reaching market requirements,and providing competitive products for our customers.Just like our principles reveal:"Customer Satisfaction,Colleague Delight,Endeavor Perpetuity〃.·Close tolerances·Long lifetime·Perfectly balanced hotrunner system·High productivity·Maximised cooling·Energy saving

Total 105 Records, Page: 18/27 Home Previous 11 12 13 14 15 16 17 18 19 20 Next Last

Production Procedures

Copyright©2022 Taizhou City Huangyan Longe Mould Co., Ltd. Designed by: Haibo Network